Epson TM-J2000 Specifications download pdf (Page 733)

100

101

CONFIDENTIAL

Paper roll Printing paper commands FS ( L

Ver. 10.05 p. 733

■ [Position information A] is shown in the following.

• Bit 0 becomes “1” immediately after this command < Function 65> is executed, and becomes “0” by

executing mechanical operations with paper feed.

• Bit 1 becomes “1” immediately after this command < Function 66> is executed, and becomes “0” by

executing mechanical operations with paper feed.

• Bit 2 becomes “1” when cover closes, manual feeding by pressing the switch is done, the print start

according to print instruction, and the power supply is turned on immediately after this command

< Function 67> is executed, and becomes “0” by executing mechanical operations with paper feed.

• Bits 0, 1, and 2 always become “0” when the origin of layout is “paper layout is not used” and when

the cover is open.

Bit Function Binary Hex Decimal

0 Relation to the label peeling position;

Not at label peeling position.

0000

Relation to the label peeling position:

Standby at the label peeling position.

1011

1 Relation to the cutting position: Not at

cutting position.

0000

Relation to the cutting position: Standby

at the cutting position.

0022

2 Relation to the print start position: Not at

print start position.

0000

Relation to the print start position:

Standby at the print start position.

1044

3 to 5 Reserved - - -

6Fixed 14064

7Fixed 0000

1 2 ... 728 729 730 731 732 733 734 735 736 737 738 ... 760 761

Comments to this Manuals

No comments

Epson TM-J2000 Specifications Page 733

Comments to this Manuals

Related products and manuals for Print & Scan Epson TM-J2000