Epson TM-J2000 Specifications Page 635

  • Download
  • Add to my manuals
  • Print
  • Page
    / 761
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 634
CONFIDENTIAL
Paper roll Customize commands GS ( E
Ver. 10.05 p. 635
Msw 1-4, 1-6, 1-7, 1-8: Activated only with the serial interface printers.
Msw 1-5: Activated only with the parallel interface printers.
When a = 2, memory switch 2 is set as follows:
Specifications when memory switches 7 (a = 7) and 8 (a = 8) are different, depending on the printer
models.
[Notes]
This function works only in the user setting mode.
The value of the memory switch is specified from bit 8 to bit 1 by b18...b11. When b = 50, the status of the
bit applied is not changed.
Example:
Transmission data that specifies memory switch 1, “Transmits the power ON notice” and does not change
other settings.
[Format] ASCII GS ( E pL pH fn ab8 b7 b6 b5 b4 b3 b2 b1
Hex 1DH 28H 45H 0AH 00H 03H 01H 32H 32H 32H 32H 32H 32H 32H 31H
Decimal29406910 0 31 50 50 50 50 50 50 50 49
Specifies b = 50 or depends on each model for a reserved bit.
Memory switches set are valid until the following operations are executed. They are not initialized by
power off or ESC @.
Execution of this function.
Execution of memory switch setting mode by panel operation when the power is turned on (supported
by some printer models.)
Msw Setting value (b) Function
2-1 49 Reserved
2-2 48 Autocutter is provided
49 Autocutter is not provided
2-3 48 Character code system for the simplified Chinese model: GB18030
49 Character code system for the simplified Chinese model: GB2312
2-4 to 2-8 50 Reserved
Page view 634
1 2 ... 630 631 632 633 634 635 636 637 638 639 640 ... 760 761

Comments to this Manuals

No comments