Epson TM-J2000 Specifications Page 255

  • Download
  • Add to my manuals
  • Print
  • Page
    / 761
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 254
CONFIDENTIAL
Paper roll Bit-image commands GS ( L GS 8 L
Ver. 10.05 p. 255
Use this function when the printer enters the “beginning of the line” or “except for graphic data, no data
in print buffer” state during the standard mode.
This function is incompatible with macros, so make sure to avoid including it when defining macros.
NV graphics data that exceeds the print area for one line will not be printed.
The scales for width and height of graphics are specified by (x, y). Therefore, in page mode with 90° or
270° clockwise-rotated graphics, the printer applies print area and dot density from [x: direction of paper
feed, y: perpendicular to direction of paper feed].
Settings for text effect (bold, underline, orientation) and font size do not affect the printing of the NV
graphics data.
Print position does not change before and after this function is used. Overprinting of data of multiple
colors can be performed by simply changing the selected color (c) and running this function again, but it is
not possible to specify the same color to overprint.
Use Function 50 to print graphics after graphics data has been stored in the print buffer when the
standard mode is selected.
The data for byte k of d1 ... dk is processed as a single item of defined NV graphics data. The defined
data (d) specifies “1” for bits corresponding to dots that will be printed and “0” for bits corresponding to
dots that will not be printed.
NV graphics data is defined using the dot density set by Function 49.
During processing of this function, real time commands are not available.
The relationship between NV graphics data (raster format) and print results is shown in the table below.
[Model-dependent variations] TM-J2000/J2100, TM-T90, TM-L90, TM-T88IV, TM-T70, TM-P60
d1 d2 ... dX
dX+1 dX+2 ... dXx2
::...:
... dk-2 dk-1 dk X = (xL + xH × 256)
Page view 254
1 2 ... 250 251 252 253 254 255 256 257 258 259 260 ... 760 761

Comments to this Manuals

No comments