Epson TM-J2000 Specifications Page 368

  • Download
  • Add to my manuals
  • Print
  • Page
    / 761
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 367
CONFIDENTIAL
Paper roll Mechanism control commands ESC i
Ver. 10.05 p. 368
ESC i
EXECUTING COMMAND
[Name] Partial cut (one point left uncut)
[Format] ASCII ESC i
Hex 1B 69
Decimal 27 105
[Range] None
[Default] None
[Printers not featuring this command] TM-J2000/J2100, TM-T90, TM-T70, TM-L90, TM-P60, TM-U230
[Description] Executes a partial cut of the roll paper.
[Recommended Functions]
This command is supported by some printer models but will not be supported by future printer models.
GS V is recommended for cutting paper. GS V <Function A> gives the same result as this command.
[Notes]
See GS V <Function A>for details.
The cutting shape depends on the specification of the mounted autocutter.
See program example and print sample for ESC i and ESC m.
[Model-dependent variations] TM-T88IV, TM-U220
TM-T88IV
The distance from print head to autocutter is about 15 mm {0.59 inch}.
After executing a paper cut, a paper feed for 1 mm {14/360 inches} before starting the next
printing can provide the best printing result without uneven paper feeding.
TM-U220
This printer may make “dot displacement” after autocutting. It is recommended to feed
approximately 2.116 mm or more for printing the next line to prevent “dot displacement after
cutting.”
Page view 367
1 2 ... 363 364 365 366 367 368 369 370 371 372 373 ... 760 761

Comments to this Manuals

No comments