CONFIDENTIAL
Paper roll Miscellaneous commands ESC p
Ver. 10.05 p. 418
ESC p
EXECUTING COMMAND
[Name] Generate pulse
[Format] ASCII ESC p m t1 t2
Hex 1B 70 m t1 t2
Decimal 27 112 m t1 t2
[Range] m = 0, 1, 48, 49
0 ≤ t1 ≤ 255
0 ≤ t2 ≤ 255
[Default] None
[Printers not featuring this command] TM-P60
[Description] Outputs the pulse specified by t1 and t2 to the specified connector pin m as follows:
• The pulse for ON time is (t1 × 2 msec) and for OFF time is (t2 × 2 msec).
[Notes]
■ If t2 < t1, the OFF time is equal to the ON time.
[Model-dependent variations] TM-T88IV, TM-T70, TM-U230, TM-U220
TM-T88IV, TM-T70
With specifications that have a buzzer, a pulse signal sounds the buzzer with this command.
Buzzer control and drawer control is set with the buzzer circuit board DIP switches. Turn off the
printer before changing DIP switch settings.
m Connector pin
0, 48 Drawer kick-out connector pin 2
1, 49 Drawer kick-out connector pin 5
Program Example for all printers
PRINT #1, CHR$(&H1B);"p";CHR$(0);CHR$(25);CHR$(250);
Comments to this Manuals