CONFIDENTIAL
Paper roll Customize commands GS ( E
Ver. 10.05 p. 655
■ Selects the black-color density in two-color printing (a = 118)
• This setting’s value affects printing in black for two-color printing.
Setting the “paper width,“ “print density,“ “select paper setting“ (a = 3, 5, 116 ) can be changed by
“Memory switch setting mode” by the panel switch operation when the power supply is turned on.
TM-T88IV
This printer supports the model dependent customized value as shown in the following table.
■ Print density settings (a = 5)
(nL + nH × 256) The black-color density
70 Light
85 Medium
100 Dark
a Type of customized value
116 Selects the print control (single color/two-color)
118 Selects the black-color density in two-color printing
(nL + nH × 256) Print density
100 Set by DIP switches [SW2-3] and [SW2-4]
65530 Print density level 1 Light
65531 Print density level 2 |
65532 Print density level 3 |
65533 Print density level 4 |
65534 Print density level 5 |
65535 Print density level 6 |
0 Print density level 7 Medium
1 Print density level 8 |
2 Print density level 9 |
3 Print density level 10 |
Comments to this Manuals