CONFIDENTIAL
Paper roll Miscellaneous commands GS ( Q
Ver. 10.05 p. 466
• X end position: [(x2L + x2H × 256) × horizontal and vertical motion units]
• Y end position: [(y2L + y2H × 256) × horizontal and vertical motion units]
■ m1 sets the type of line. The line width differs according to the model (refer to the model information).
[Notes]
■ This function can be used when page mode is selected. Select page mode with ESC L.
■ You cannot specify a start coordinate [X start position, Y start position] and end coordinate [X end
position, Y end position] that exceed the printing area set with ESC W.
■ You cannot specify [X start position ≥ X end position] or [Y start position ≥ Y end position].
■ X and Y and the horizontal and vertical motion units used for the start position specified with ESC T are
changed as shown in the table below.
m1 Line type
1 Continuous line: Thin
2 Continuous line:
Moderately thick
3 Continuous line: Thick
Comments to this Manuals