CONFIDENTIAL
Paper roll Miscellaneous commands DLE DC4 (fn = 1)
Ver. 10.05 p. 386
• When this command is disabled by GS (D
■ This command can be used even if the printer is disabled by ESC =.
■ With a serial interface, the printer executes this command even when it is in offline, receive buffer full.
■ With a parallel interface, if the printer is in BUSY condition, this command cannot be used in the following
states.
• When DIP switch (BUSY condition) is on: receive buffer full
• When DIP switch (BUSY condition) is off: offline, receive buffer full, or error status
■ This command is effective when the printer is disabled by ESC = (select peripheral device).
[Model-dependent variations] TM-J2000/J2100, TM-T90, TM-T88IV, TM-T70, TM-L90, TM-U220
TM-J2000/J2100, TM-T90, TM-L90
The BUSY condition is selected by memory switch 1-3.
TM-T88IV, TM-T70
The BUSY condition is selected by memory switch 2-1.
With specifications that have a buzzer, a pulse signal sounds the buzzer with this command.
Buzzer control and drawer control is set with the buzzer circuit board DIP switches. Turn off the
printer before changing DIP switch settings.
Program Example
PRINT #1, CHR$(&H10);CHR$(&H14);CHR$(1)l;CHR$(0);CHR$(5);
Comments to this Manuals