CONFIDENTIAL
Paper roll Print commands ESC K
Ver. 10.05 p. 76
ESC K
EXECUTING COMMAND
[Name] Print and reverse feed
[Format] ASCII ESC K n
Hex 1B 4B n
Decimal 27 75 n
[Range] TM-U230, TM-U220: 0 ≤ n ≤ 48
[Default] None
[Printers not featuring this command] TM-J2000/J2100, TM-T90, TM-T88IV, TM-T70, TM-L90, TM-P60
[Description] Prints the data in the print buffer and feeds the paper n × (vertical motion unit) in the reverse direction.
[Notes]
■ The maximum paper feed amount depends on the printer model.
■ After printing, the print position moves to the beginning of the line. When a left margin is set, the
position of the left margin is the beginning of the line.
■ When standard mode is selected, the vertical motion unit is used.
■ When page mode is selected, the vertical or horizontal motion unit is used for the print direction set by
ESC T.
• When the starting position is set to the upper left or lower right of the print area using ESC T, the
vertical motion unit is used.
• When the starting position is set to the upper right or lower left of the print area using ESC T, the
horizontal motion unit is used.
■ When this command is processed in page mode, only the print position moves; the printer does not
perform actual printing.
■ This command is used to temporarily feed a specific length without changing the line spacing set by other
commands.
Comments to this Manuals