CONFIDENTIAL
Paper roll Kanji Commands FS 2
Ver. 10.05 p. 515
k = 32 [Kanji Font C (16 × 16)
TM-U230, TM-U220:
k = 32
[Description] Defines the user-defined Kanji character pattern specified by the character codes (c1 and c2) of the currently
selected Kanji font.
• c1 specifies the first byte of a character code for a user-defined Kanji character.
• c2 specifies the second byte of a character code for a user-defined Kanji character.
• d specifies the defined data (column format).
• k indicates the number of defined data. k is an explanation parameter; therefore, it does not need to
be transmitted.
[Notes] ■ This command is effective only for the Japanese, Simplified Chinese, and Traditional Chinese models.
■ The printer processes k byte data of d1...dk as defined data. The defined data (d) sets a corresponding bit
to 1 to print a dot or to 0 not to print a dot.
■ The number of characters to be defined differ, depending on the printer models.
■ Different user-defined characters can be defined for each Kanji character. Kanji fonts can be specified by
function 48 of FS(A.
■ Defined data is effective until it is redefined, ESC @ is executed, the printer is reset, or the power is
turned off.
■ User-defined characters are not defined and space is printed at the default.
■ The relationship between the defined data and a print result is as follows.
Example: data of the definition of the user defined character (2 bytes in vertical × 16 dots in horizontal) is
necessary. (k = 32)
d1 d3 d5 ... d27 d29 d31
MSB
LSB
d2 d4 d6 ... d28 d30 d32
MSB
LSB
Comments to this Manuals