Epson TM-J2000 Specifications Page 639

  • Download
  • Add to my manuals
  • Print
  • Page
    / 761
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 638
CONFIDENTIAL
Paper roll Customize commands GS ( E
Ver. 10.05 p. 639
TM-L90
TM-L90 with Peeler:
Receive buffer capacity [Msw 1-2]: Large (when b = 48) = 4 KB; small (when b = 49) = 45 bytes
“DM-D (customer display) is connected or not” [Msw 1-6] function is not supported.
The settings of [Msw 1-2] ~ [Msw 1-4], [Msw 1-7], [Msw 1-8], and [Msw 8-4] can also be changed by the
memory switch setting mode of the panel switch operation when turning on the power.
• When a = 7, memory switch 7 is set as follows:
[Msw 7-8]: Enabled in the continuous issuing mode.
The process of label issuing is as follows:
Feeds paper to the label peeling position when the FEED button is pressed.
Feeds paper to the print starting position on the next label when the FEED button is pressed again.
• When a = 8, memory switch 8 is set as follows:
Msw Setting value (b) Function
7-1 to 7-7 50 Reserved
7-8 48 Printer operation when the FEED button is pressed: Feeds paper to the next
printing position on the next label
49 Printer operation when the FEED button is pressed: Issues label
Msw Setting value (b) Function
8-1 48 Recovery from paper layout error: DLE ENQ execution or pressing the FEED
button
49 Recovery from paper layout error: DLE ENQ execution
8-2 48 Recovery from paper layout error: DLE ENQ execution or opening/closing the
cover
49 Recovery from paper layout error: DLE ENQ execution
8-3 48 PAPER LED is on when a paper near end is detected
49 PAPER LED is off when a paper near end is detected
Page view 638
1 2 ... 634 635 636 637 638 639 640 641 642 643 644 ... 760 761

Comments to this Manuals

No comments