CONFIDENTIAL
Paper roll Customize commands GS ( E
Ver. 10.05 p. 638
Setting of [Msw 8-3] is supported differently, depending on the firmware version.
Setting of [Msw 8-5] affects the performing of command GS k.
Settings of [Msw 8-7] affect the operation of ESC &, ESC c 3, GS *.
<Japanese model>
Setting of [Msw 8-3] is supported differently, depending on the firmware version.
Setting of [Msw 8-5] affects the performing of command GS k.
Setting the memory switch can be changed by “Memory switch setting mode” by the panel switch operation
when the power supply is turned on as shown below.
TM-T88IV, TM-T70
This printer does not support this function.
8-7 48 Compatibility with TM-T88II: not compatible
49 Compatibility with TM-T88II: compatible
8-8 48 Roll paper cover open during printing: automatic recoverable error
49 Roll paper cover open during printing: recoverable error
Msw Setting value (b) Function
8-1, 8-2 50 Reserved
8-3 48 PAPER LED is on when a paper near end is detected
49 PAPER LED is off when a paper near end is detected
8-4 50 Reserved
8-5 48 Spacing of both sides for bar code: not inserted
49 Spacing of both sides for bar code: inserts a space
8-6 to 8-7 50 Reserved
8-8 48 Roll paper cover open during printing: automatic recoverable error
49 Roll paper cover open during printing: recoverable error
Printer model The memory switch can be changed by “Memory switch setting mode”
Other than Japanese model [Msw 1-1] ~ [Msw 1-4], [Msw 1-7], [Msw 1-8], [Msw 2-2], [Msw 8-7]
Japanese model [Msw 1-2] ~ [Msw 1-4], [Msw 1-7], [Msw 1-8], [Msw 2-2]
Comments to this Manuals